Audi TT /TT RS Front BBK Big Brake Kit 4 Piston Forged Two Pieces
Caliper With Disc Rotor 17 Inch Car
| Audi | AUDI TT 2.0T / 3.2 V6 AWD / TTS Front (8J) 2007 |
| Audi | AUDI TT 3.2 V6 AWD Front / TTS Front (8J) 2006 |
| Audi | AUDI TT 3.2L Rear (8J) 2007 |
| Audi | AUDI TT Front 1.8 20V (110/132/165Kw) (8N) 1999 2006 |
| Audi | AUDI TT RS Front (8J) 2009 |
| Audi | AUDI TT RS Front (8J) 2009 |
| Audi | AUDI TT RS Rear (8J) 2009 |
| Audi | AUDI TTS Rear (8J) 2009 |
What's in the Box
Passenger Side Front TEI Racing Six-Piston Caliper
Driver Side Front TEI Racing Six-Piston Caliper
2-piece TEI Racing Front Rotors
Braided Stainless Steel Brake Lines
Brake Pads (one set, for both calipers)
Mounting Brackets
Installation Hardware
Features
TEI Racing Bolt-On Front Brake Kit
6 Piston Monoblock Aluminum Calipers
2-piece (378mm/405mm) Type 1 Slotted /Drilled Brake Rotors
Braided Stainless Steel Lines
Compatible with Factory Master Cylinder, ABS and Traction Control
System
Brake Pads
Material: Ceramic Graphite
Heat Resistant:0-500C
Friction Coefficient:0.49
Rotor (Disc+Center Hub)
craft: Forged
Plane Bounce:<0.03mm
Material:
1,Disc:High Carbon Iron
2,Center Hub: Aerial 6061 Aluminum Alloy
ROTOR SPECS:
Two-piece floating rotor with 6061-T6 aerospace grade alloy cap.
It comes out fully balanced.
Rotor rings are made of FC30 cast iron with corrosion resistant
coating.
Drilling/slotting/drilling and slotting rotor rings are available
at no additional cost.
(We recommend drilling in the streets and grooving in the tracks
and races)
Curved blade ventilation to achieve the best cooling effect.
The fully floating rotor uses floating hardware (detachable and
reconstructable) with anti-knock system.
It provides a lower tendency to warp, less drag and wear because
the rotor ring itself is centered with the bearing bush.
Only for 330mm and larger rotors.
Semi-floating rotors are bolted instead, and the rotors are
attached to the cap.
Custom anodized rotor cap color.
Brackets/Adapters
Material: Aerial 6061 Aliminum Alloy
Craft: CNC
Brake Hose/Brake line
Material: Inside teflon, Braided Stainless steel mid layer
,Protective outer PVC weather proof shell
WARRANTY:
10 years experience in caliper casting, caliper parts and sealing.
2 years hardware and support installation experience.
Brake line lifetime warranty. The DOT/ADR for approval
Rotors travel 10,000 km /3 months.
| TEI Racing Rotor Size | Minimum Inch Wheel Size |
| 285*24mm | 15inch wheels |
| 300*24mm | 16inch wheels or above |
| 300*28mm | 17inch wheels or above |
| 330*28mm | 17inch wheels or above |
| 345*28mm | 18inch wheels or above |
| 355*32mm | 18inch wheels or above |
| 378*32mm | 19inch wheels or above |
| 405*34mm | 20inch wheels or above |
Installation Info
Installation Time
(approx) 4 Hours
Difficulty Level:
Mechanical expertise or professional installation required.
